Description
Toyota Hilux Body Cladding 2015+ I Matte Black (4pcs) I Side Door
This Toyota Hilux Body Cladding for the 8th Generation 2015+ AN120/AN130 Double Cab is a tape-on styling and protection upgrade. Supplied as a complete 4-piece set, these matte black side cladding panels run along the lower door sections on both sides of the truck, adding rugged off-road proportions while shielding the doors from stone chips, car park knocks and trail debris.
Toyota Hilux Side Door – Fitment
- Toyota Hilux 8th Generation AN120 / AN130 Double Cab (2015-2020 pre-facelift)
- Toyota Hilux 8th Generation AN120 / AN130 Double Cab (2021+ facelift)
Compatibility Note: This 4-piece set is designed for the 4-door Double Cab door profile. It does not fit Extra Cab or Single Cab models, and it is not compatible with trucks already fitted with factory side mouldings unless these are removed first. Please compare your doors with the listing photos before ordering.
What’s in the Box
- 4x Toyota Hilux Body Cladding panels (2 front doors, 2 rear doors) – Matte Black ABS
- Pre-applied automotive-grade double-sided tape on every panel
- 4x Primer wipes for surface preparation
- 1x Printed installation manual
Key Features
- Complete 4-piece set – both front and rear doors covered in one kit
- Drill-free tape-on fitment – developed with 3D scan technology from the original Hilux door geometry for a precise, gap-free line along the full side of the truck
- Matte black finish – ready to install straight out of the box, no painting or prep work required
- Durable ABS plastic – the same material used in OEM bumpers; strong, flexible and resistant to stone chips, impacts and weather
- Real door protection – takes the hits your paintwork would otherwise absorb
- Completes the off-road look – adds width and visual toughness to the side profile and pairs naturally with wheel arch and bumper styling
Installation
The body cladding mounts directly to the doors using the pre-applied automotive-grade double-sided tape – no cutting or drilling of the bodywork is required.
- Wash and fully dry the mounting area. The surface must be completely clean, dry and free of wax, polish or grease before you begin.
- Wipe the mounting area with the supplied primer wipe and let it flash off for a few minutes.
- Dry-fit each panel first to confirm alignment, then peel the tape liner and press the panel firmly into place along its full length.
- Apply firm pressure across the whole panel to bond the tape.
Fit in a dry, sheltered area at a surface temperature above 15°C / 60°F for the strongest bond. Do not wash the vehicle or expose it to water for 24 hours after fitting, and avoid pressure washing the panel edges for the first week while the adhesive fully cures.
Installation typically takes 60-90 minutes for the full set with basic hand tools. If you are not confident, we recommend fitting by a qualified professional. The products ship with a protective film; only remove it once you have confirmed fitment on your vehicle.
Complete the Look
Pair this body cladding with our matching Toyota Hilux wheel arch trims and bumper styling parts for a complete rugged package on your Hilux.
